Remove Indy ANC from Bluetooth

On your phone, open the Bluetooth settings and remove or forget Indy ANC from the paired devices list.

Power off both earbuds

Touch and hold the sensor on each earbud for around 6 seconds to manually power them off.

Hold both sensors for 15 seconds

From off, touch and hold the sensor on each earbud for around 15 seconds until the LED turns solid blue.

Tap each sensor twice

While the LED is solid blue, tap the sensor twice on each earbud.

The LED should flash purple to show that the reset has been successful.

Wait for the earbuds to sync

The earbuds should stay powered on and the LEDs will quickly flash red and blue while they sync together and enter pairing mode.

Wait for pairing mode

Wait for only the left earbud to flash red and blue. You should hear the Pairing voice prompt.

Select Indy ANC on your phone

Open your phone’s Bluetooth settings and look for Indy ANC in the list of available Bluetooth devices.

For Android devices, tap + Pair New Device, then select Indy ANC.

Accept the pairing request

Accept the Pair or OK prompt that appears on your screen.

When pairing is complete, you should hear a voice prompt saying connected.